# Text

`Text` is Tomo's datatype to represent text. The name `Text` is used instead of
"string" because Tomo text represents immutable, normalized unicode data with
fast indexing that has an implementation that is efficient for concatenation.
These are _not_ C-style NUL-terminated character arrays. GNU libunistring is
used for full Unicode functionality (grapheme cluster counts, capitalization,
etc.).

## Implementation

Internally, Tomo text's implementation is based on [Raku's
strings](https://docs.raku.org/language/unicode). Strings store their grapheme
cluster count and either a compact array of 8-bit ASCII characters (for ASCII
text), an array of 32-bit normal-form grapheme cluster values (see below), or a
flat subarray of multiple texts that are either ASCII or graphemes (the
structure is not arbitrarily nested).

### Normal-Form Graphemes

In order to maintain compact storage, fast indexing, and fast slicing,
non-ASCII text is stored as 32-bit normal-form graphemes. A normal-form
grapheme is either a positive value representing a Unicode codepoint that
corresponds to a grapheme cluster (most Unicode letters used in natural
language fall into this category after normalization) or a negative value
representing an index into an internal array of "synthetic grapheme cluster
codepoints." Here are some examples:

- `A` is a normal codepoint that is also a grapheme cluster, so it would
  be represented as the number `65`
- `ABC` is three separate grapheme clusters, one for `A`, one for `B`, one
  for `C`.
- `Å` is also a single codepoint (`LATIN CAPITAL LETTER A WITH RING ABOVE`)
  that is also a grapheme cluster, so it would be represented as the number
  `197`.
- `家` (Japanese for "house") is a single codepoint (`CJK Unified
  Ideograph-5BB6`) that is also a grapheme cluster, so it would be represented
  as the number `23478`
-`👩🏽‍🚀` is a single graphical cluster, but it's made up of several
  combining codepoints (`["WOMAN", "EMOJI MODIFIER FITZPATRICK TYPE-4", "ZERO
  WITDH JOINER", "ROCKET"]`). Since this can't be represented with a single
  codepoint, we must create a synthetic codepoint for it. If this was the `n`th
  synthetic codepoint that we've found, then we would represent it with the
  number `-n`, which can be used to look it up in a lookup table. The lookup
  table holds the full sequence of codepoints used in the grapheme cluster.

## Syntax

Text has a flexible syntax designed to make it easy to hold values from
different languages without the need to have lots of escape sequences and
without using printf-style string formatting.

```
// Basic text:
str := "Hello world"
str2 := 'Also text'
str3 := `Backticks too`
```

### Line Splits

Long text can be split across multiple lines by having two or more dots at the
start of a new line on the same indentation level that started the text:

```
str := "This is a long
....... line that is split in code"
```

### Multi-line Text

Multi-line text has indented (i.e. at least one tab more than the start of the
text) text inside quotation marks. The leading and trailing newline are
ignored:

```
multi_line := "
    This text has multiple lines.
    Line two.

    You can split a line
.... using two or more dots to make an elipsis.

    Remember to include whitespace after the elipsis if desired.

    Or don't if you're splitting a long word like supercalifragilisticexpia
....lidocious

        This text is indented by one level in the text

    "quotes" are ignored unless they're at the same indentation level as the
.... start of the text.

    The end (no newline after this).
"
```

## Text Interpolations

Inside double quoted text, you can use a dollar sign (`$`) to insert an
expression that you want converted to text. This is called text interpolation:

```
// Interpolation:
my_var := 5
str := "My var is $my_var!"
// Equivalent to "My var is 5!"

// Using parentheses:
str := "Sum: $(1 + 2)"
// equivalent to "Sum: 3"
```

Single-quoted text does not have interpolations:

```
// No interpolation here:
str := 'Sum: $(1 + 2)'
```

### Text Escapes

Unlike other languages, backslash is *not* a special character inside of text.
For example, `"x\ny"` has the characters `x`, `\`, `n`, `y`, not a newline.
Instead, a series of character escapes act as complete text literals without
quotation marks:

```
newline := \n
crlf := \r\n
quote := \"
```

These text literals can be used as interpolation values with or without
parentheses, depending on which you find more readable:

```
two_lines := "one$(\n)two"
has_quotes := "some $\"quotes$\" here"
```

However, in general it is best practice to use multi-line text to avoid these problems:

```
str := "
    This has
    multiple lines and "quotes" too!
"
```

### Customizable `$`-Text

Sometimes you might need to use a lot of literal `$`s or quotation marks in
text. In such cases, you can use the more customizable form of text. The
customizable form lets you explicitly specify which character to use for
interpolation and which characters to use for delimiting the text.

The first character after the `$` is the custom interpolation character, which
can be any of the following symbols: `~!@#$%^&*+=\?`. If none of these
characters is used, the default interpolation character is `$`. Since this is
the default, you can disable interpolation altogether by using `$` here (i.e. a
double `$$`).

The next thing in a customizable text is the character used to delimit the
text. The text delimiter can be any of the following symbols: `` "'`|/;([{< ``
If the text delimiter is one of `([{<`, then the text will continue until a
matching `)]}>` is found, not terminating unless the delimiters are balanced
(i.e. nested pairs of delimiters are considered part of the text).

Here are some examples:

```
$"Equivalent to normal text with dollar interps: $(1 + 2)"
$@"The same, but the AT symbol interpolates: @(1 + 2)"
$$"No interpolation here, $ is just a literal character"
$|This text is pipe-delimited, so it can have "quotes" and 'single quotes' and interpolates with dollar sign: $(1+2)|
$(This text is parens-delimited, so you can have (nested) parens without ending the text)
$=[This text is square-bracket delimited [which can be nested] and uses equals for interps: =(1 + 2)]
$@/look ma, regex literals!/
```

When text is delimited by matching pairs (`()`, `[]`, `{}`, or `<>`), they
can only be closed by a matched closing character at the same indentation
level, ignoring nested pairs:

```
$$(Inside parens, you can have (nested ()) parens no problem)
$$"But only (), [], {}, and <> are matching pairs, you can't have nested quotes"
$$(
    When indented, an unmatched ) won't close the text
    An unmatched ( won't mess things up either
    Only matching pairs on the same indentation level are counted:
)
$$(Multi-line text with nested (parens) and
.. line continuation)
```

As a special case, when you use the same character for interpolation and text
delimiting, no interpolations are allowed:

```
plain := $""This text has {no interpolations}!"
```

**Note:** Normal doubly quoted text with no dollar sign (e.g. `"foo"`) are a
shorthand for `${}"foo"`. Singly quoted text with no dollar sign (e.g.
`'foo'`) are shorthand for `$''foo'`.

## Operations

### Concatenation

Concatenation in the typical case is a fast operation: `"{x}{y}"` or `x ++ y`.

Because text concatenation is typically fast, there is no need for a separate
"string builder" class in the language and no need to use an array of text
fragments.

### Text Length

Text length gives you the number of grapheme clusters in the text, according to
the unicode standard. This corresponds to what you would intuitively think of
when you think of "letters" in a string. If you have text with an emoji that has
several joining modifiers attached to it, that text has a length of 1.

```tomo
>> "hello".length
= 5
>> "👩🏽‍🚀".length
= 1
```

### Iteration

Iteration is *not* supported for text. It is rarely ever the case that you will
need to iterate over text, but if you do, you can iterate over the length of
the text and retrieve 1-wide slices. Alternatively, you can split the text into
its constituent grapheme clusters with `text:split()` and iterate over those.

### Equality, Comparison, and Hashing

All text is compared and hashed using unicode normalization. Unicode provides
several different ways to represent the same text. For example, the single
codepoint `U+E9` (latin small e with accent) is rendered the same as the two
code points `U+65 U+301` (latin small e, acute combining accent) and has an
equivalent linguistic meaning. These are simply different ways to represent the
same "letter." In order to make it easy to write correct code that takes this
into account, Tomo uses unicode normalization for all text comparisons and
hashing. Normalization does the equivalent of converting text to a canonical
form before performing comparisons or hashing. This means that if a table is
created that has text with the codepoint `U+E9` as a key, then a lookup with
the same text but with `U+65 U+301` instead of `U+E9` will still succeed in
finding the value because the two texts are equivalent under normalization.

# Patterns

As an alternative to full regular expressions, Tomo provides a limited string
matching pattern syntax that is intended to solve 80% of use cases in under 1%
of the code size (PCRE's codebase is roughly 150k lines of code, and Tomo's
pattern matching code is a bit under 1k lines of code). Tomo's pattern matching
syntax is highly readable and works well for matching literal text without
getting [leaning toothpick syndrome](https://en.wikipedia.org/wiki/Leaning_toothpick_syndrome).

For more advanced use cases, consider linking against a C library for regular
expressions or pattern matching.

`Pattern` is a [domain-specific language](docs/langs.md), in other words, it's
like a `Text`, but it has a distinct type. As a convenience, you can use
`$/.../` to write pattern literals instead of using the general-purpose DSL
syntax of `$Pattern"..."`.

Patterns are used in a small, but very powerful API that handles many text
functions that would normally be handled by a more extensive API:

```
Text.has(pattern:Pattern -> Bool)
Text.find(pattern:Pattern, start=1 -> Match?)
Text.find_all(pattern:Pattern -> [Match])
Text.matches(pattern:Pattern -> [Text]?)
Text.map(pattern:Pattern, fn:func(m:Match -> Text) -> Text)
Text.replace(pattern:Pattern, replacement:Text, placeholder:Pattern=$// -> [Text])
Text.replace_all(replacements:{Pattern:Text}, placeholder:Pattern=$// -> [Text])
Text.split(pattern:Pattern -> [Text])
Text.trim(pattern=$/{whitespace}/, trim_left=yes, trim_right=yes -> [Text])
```

Pattern matching functions work with a type called `Match` that has three fields:

- `text`: The full text of the match.
- `index`: The index in the text where the match was found.
- `captures`: An array containing the matching text of each non-literal pattern group.

See [Text Functions](#Text-Functions) for the full API documentation.

## Syntax

Patterns have three types of syntax:

- `{` followed by an optional count (`n`, `n-m`, or `n+`), followed by an
  optional `!` to negate the pattern, followed by an optional pattern name or
  Unicode character name, followed by a required `}`.

- Any matching pair of quotes or parentheses or braces with a `?` in the middle
  (e.g. `"?"` or `(?)`).

- Any other character is treated as a literal to be matched exactly.

## Named Patterns

Named patterns match certain pre-defined patterns that are commonly useful. To
use a named pattern, use the syntax `{name}`. Names are case-insensitive and
mostly ignore spaces, underscores, and dashes.

- `..` - Any character (note that a single `.` would mean the literal period
  character).
- `digit` - A unicode digit
- `email` - an email address
- `emoji` - an emoji
- `end` - the very end of the text
- `id` - A unicode identifier
- `int` - One or more digits with an optional `-` (minus sign) in front
- `ip` - an IP address (IPv4 or IPv6)
- `ipv4` - an IPv4 address
- `ipv6` - an IPv6 address
- `nl`/`newline`/`crlf` - A line break (either `\r\n` or `\n`)
- `num` - One or more digits with an optional `-` (minus sign) in front and an optional `.` and more digits after
- `start` - the very start of the text
- `uri` - a URI
- `url` - a URL (URI that specifically starts with `http://`, `https://`, `ws://`, `wss://`, or `ftp://`)

For non-alphabetic characters, any single character is treated as matching
exactly that character. For example, `{1{}` matches exactly one `{`
character. Or, `{1.}` matches exactly one `.` character.

Patterns can also use any Unicode property name. Some helpful ones are:

- `hex` - Hexidecimal digits
- `lower` - Lowercase letters
- `space` - The space character
- `upper` - Uppercase letters
- `whitespace` - Whitespace characters

Patterns may also use exact Unicode codepoint names. For example: `{1 latin
small letter A}` matches `a`.

## Negating Patterns

If an exclamation mark (`!`) is placed before a pattern's name, then characters
are matched only when they _don't_ match the pattern. For example, `{!alpha}`
will match all characters _except_ alphabetic ones.

## Interpolating Text and Escaping

To escape a character in a pattern (e.g. if you want to match the literal
character `?`), you can use the syntax `{1 ?}`. This is almost never necessary
unless you have text that looks like a Tomo text pattern and has something like
`{` or `(?)` inside it.

However, if you're trying to do an exact match of arbitrary text values, you'll
want to have the text automatically escaped. Fortunately, Tomo's injection-safe
DSL text interpolation supports automatic text escaping. This means that if you
use text interpolation with the `$` sign to insert a text value, the value will
be automatically escaped using the `{1 ?}` rule described above:

```tomo
# Risk of code injection (would cause an error because 'xxx' is not a valid
# pattern name:
>> user_input := get_user_input()
= "{xxx}"

# Interpolation automatically escapes:
>> $/$user_input/
= $/{1{}..xxx}/

# This is: `{ 1{ }` (one open brace) followed by the literal text "..xxx}"

# No error:
>> some_text:find($/$user_input/)
= 0
```

If you prefer, you can also use this to insert literal characters:

```tomo
>> $/literal $"{..}"/
= $/literal {1{}..}/
```

## Repetitions

By default, named patterns match 1 or more repetitions, but you can specify how
many repetitions you want by putting a number or range of numbers first using
`n` (exactly `n` repetitions), `n-m` (between `n` and `m` repetitions), or `n+`
(`n` or more repetitions):

```
{4-5 alpha}
0x{hex}
{4 digit}-{2 digit}-{2 digit}
{2+ space}
{0-1 question mark}
```

# Text Functions

## `as_c_string`

**Description:**  
Converts a `Text` value to a C-style string.

**Signature:**  
```tomo
func as_c_string(text: Text -> CString)
```

**Parameters:**

- `text`: The text to be converted to a C-style string.

**Returns:**  
A C-style string (`CString`) representing the text.

**Example:**  
```tomo
>> "Hello":as_c_string()
= CString("Hello")
```

---

## `at`

**Description:**  
Get the graphical cluster at a given index. This is similar to `str[i]` with
ASCII text, but has more correct behavior for unicode text.

**Signature:**  
```tomo
func at(text: Text, index: Int -> Text)
```

**Parameters:**

- `text`: The text from which to get a cluster.
- `index`: The index of the graphical cluster (1-indexed).

**Returns:**  
A `Text` with the single graphical cluster at the given index. Note: negative
indices are counted from the back of the text, so `-1` means the last cluster,
`-2` means the second-to-last, and so on.

**Example:**  
```tomo
>> "Amélie":at(3)
= "é"
```

---

## `bytes`

**Description:**  
Converts a `Text` value to an array of bytes representing a UTF8 encoding of
the text.

**Signature:**  
```tomo
func bytes(text: Text -> [Byte])
```

**Parameters:**

- `text`: The text to be converted to UTF8 bytes.

**Returns:**  
An array of bytes (`[Byte]`) representing the text in UTF8 encoding.

**Example:**  
```tomo
>> "Amélie":bytes()
= [65[B], 109[B], 195[B], 169[B], 108[B], 105[B], 101[B]] : [Byte]
```

---

## `codepoint_names`

**Description:**  
Returns an array of the names of each codepoint in the text.

**Signature:**  
```tomo
func codepoint_names(text: Text -> [Text])
```

**Parameters:**

- `text`: The text from which to extract codepoint names.

**Returns:**  
An array of codepoint names (`[Text]`).

**Example:**  
```tomo
>> "Amélie":codepoint_names()
= ["LATIN CAPITAL LETTER A", "LATIN SMALL LETTER M", "LATIN SMALL LETTER E WITH ACUTE", "LATIN SMALL LETTER L", "LATIN SMALL LETTER I", "LATIN SMALL LETTER E"]
```

---

## `utf32_codepoints`

**Description:**  
Returns an array of Unicode code points for UTF32 encoding of the text.

**Signature:**  
```tomo
func utf32_codepoints(text: Text -> [Int32])
```

**Parameters:**

- `text`: The text from which to extract Unicode code points.

**Returns:**  
An array of 32-bit integer Unicode code points (`[Int32]`).

**Example:**  
```tomo
>> "Amélie":utf32_codepoints()
= [65[32], 109[32], 233[32], 108[32], 105[32], 101[32]] : [Int32]
```

---

## `ends_with`

**Description:**  
Checks if the `Text` ends with a literal suffix text.

**Signature:**  
```tomo
func ends_with(text: Text, suffix: Text -> Bool)
```

**Parameters:**

- `text`: The text to be searched.
- `suffix`: The literal suffix text to check for.

**Returns:**  
`yes` if the text has the target, `no` otherwise.

**Example:**  
```tomo
>> "hello world":ends_with("world")
= yes
```

---

## `from_c_string`

**Description:**  
Converts a C-style string to a `Text` value.

**Signature:**  
```tomo
func from_c_string(str: CString -> Text)
```

**Parameters:**

- `str`: The C-style string to be converted.

**Returns:**  
A `Text` value representing the C-style string.

**Example:**  
```tomo
>> Text.from_c_string(CString("Hello"))
= "Hello"
```

---

## `from_codepoint_names`

**Description:**  
Returns text that has the given codepoint names (according to the Unicode
specification) as its codepoints. Note: the text will be normalized, so the
resulting text's codepoints may not exactly match the input codepoints.

**Signature:**  
```tomo
func from_codepoint_names(codepoint_names: [Text] -> [Text])
```

**Parameters:**

- `codepoint_names`: The names of each codepoint in the desired text. Names
  are case-insentive.

**Returns:**  
A new text with the specified codepoints after normalization has been applied.
Any invalid names are ignored.

**Example:**  
```tomo
>> Text.from_codepoint_names([
  "LATIN CAPITAL LETTER A WITH RING ABOVE",
  "LATIN SMALL LETTER K",
  "LATIN SMALL LETTER E",
]
= "Åke"
```

---

## `from_codepoints`

**Description:**  
Returns text that has been constructed from the given UTF32 codepoints. Note:
the text will be normalized, so the resulting text's codepoints may not exactly
match the input codepoints.

**Signature:**  
```tomo
func from_codepoint_names(codepoints: [Int32] -> [Text])
```

**Parameters:**

- `codepoints`: The UTF32 codepoints in the desired text.

**Returns:**  
A new text with the specified codepoints after normalization has been applied.

**Example:**  
```tomo
>> Text.from_codepoints([197[32], 107[32], 101[32]])
= "Åke"
```

---

## `from_bytes`

**Description:**  
Returns text that has been constructed from the given UTF8 bytes. Note: the
text will be normalized, so the resulting text's UTF8 bytes may not exactly
match the input.

**Signature:**  
```tomo
func from_codepoint_names(codepoints: [Int32] -> [Text])
```

**Parameters:**

- `codepoints`: The UTF32 codepoints in the desired text.

**Returns:**  
A new text based on the input UTF8 bytes after normalization has been applied.

**Example:**  
```tomo
>> Text.from_bytes([195[B], 133[B], 107[B], 101[B]])
= "Åke"
```

---

## `find`

**Description:**  
Finds the first occurrence of a pattern in the given text (if any).
See: [Patterns](#Patterns) for more information on patterns.

**Signature:**  
```tomo
func find(text: Text, pattern: Pattern, start: Int = 1 -> Int?)
```

**Parameters:**

- `text`: The text to be searched.
- `pattern`: The pattern to search for.
- `start`: The index to start the search.

**Returns:**  
`!Match` if the target pattern is not found, otherwise a `Match` struct
containing information about the match.

**Example:**  
```tomo
>> " #one   #two  #three   ":find($/#{id}/, start=-999)
= none : Match?
>> " #one   #two  #three   ":find($/#{id}/, start=999)
= none : Match?
>> " #one   #two  #three   ":find($/#{id}/)
= Match(text="#one", index=2, captures=["one"]) : Match?
>> " #one   #two  #three   ":find("{id}", start=6)
= Match(text="#two", index=9, captures=["two"]) : Match?
```

---

## `find_all`

**Description:**  
Finds all occurrences of a pattern in the given text.
See: [Patterns](#Patterns) for more information on patterns.

**Signature:**  
```tomo
func find_all(text: Text, pattern: Pattern -> [Match])
```

**Parameters:**

- `text`: The text to be searched.
- `pattern`: The pattern to search for.

**Returns:**  
An array of every match of the pattern in the given text.
Note: if `text` or `pattern` is empty, an empty array will be returned.

**Example:**  
```tomo
>> " #one  #two #three   ":find_all($/#{alpha}/)
= [Match(text="#one", index=2, captures=["one"]), Match(text="#two", index=8, captures=["two"]), Match(text="#three", index=13, captures=["three"])]

>> "    ":find_all("{alpha}")
= []

>> " foo(baz(), 1)  doop() ":find_all("{id}(?)")
= [Match(text="foo(baz(), 1)", index=2, captures=["foo", "baz(), 1"]), Match(text="doop()", index=17, captures=["doop", ""])]

>> "":find_all($//)
= []

>> "Hello":find_all($//)
= []
```

---

## `from`

**Description:**  
Get a slice of the text, starting at the given position.

**Signature:**  
```tomo
func from(text: Text, first: Int -> Text)
```

**Parameters:**

- `text`: The text to be sliced.
- `frist`: The index of the first grapheme cluster to include (1-indexed).

**Returns:**  
The text from the given grapheme cluster to the end of the text. Note: a
negative index counts backwards from the end of the text, so `-1` refers to the
last cluster, `-2` the second-to-last, etc. Slice ranges will be truncated to
the length of the string.

**Example:**  
```tomo
>> "hello":from(2)
= "ello"

>> "hello":from(-2)
= "lo"
```

---

## `has`

**Description:**  
Checks if the `Text` contains a target pattern (see: [Patterns](#Patterns)).

**Signature:**  
```tomo
func has(text: Text, pattern: Pattern -> Bool)
```

**Parameters:**

- `text`: The text to be searched.
- `pattern`: The pattern to search for.

**Returns:**  
`yes` if the target pattern is found, `no` otherwise.

**Example:**  
```tomo
>> "hello world":has($/wo/)
= yes
>> "hello world":has($/{alpha}/)
= yes
>> "hello world":has($/{digit}/)
= no
>> "hello world":has($/{start}he/)
= yes
```

---

## `join`

**Description:**  
Joins an array of text pieces with a specified glue.

**Signature:**  
```tomo
func join(glue: Text, pieces: [Text] -> Text)
```

**Parameters:**

- `glue`: The text used to join the pieces.
- `pieces`: The array of text pieces to be joined.

**Returns:**  
A single `Text` value with the pieces joined by the glue.

**Example:**  
```tomo
>> ", ":join(["one", "two", "three"])
= "one, two, three"
```

---

## `lines`

**Description:**  
Splits the text into an array of lines of text, preserving blank lines,
ignoring trailing newlines, and handling `\r\n` the same as `\n`.

**Signature:**  
```tomo
func split(text: Text -> [Text])
```

**Parameters:**

- `text`: The text to be split into lines.

**Returns:**  
An array of substrings resulting from the split.

**Example:**  
```tomo
>> "one$(\n)two$(\n)three":lines()
= ["one", "two", "three"]
>> "one$(\n)two$(\n)three$(\n)":lines()
= ["one", "two", "three"]
>> "one$(\n)two$(\n)three$(\n\n)":lines()
= ["one", "two", "three", ""]
>> "one$(\r\n)two$(\r\n)three$(\r\n)":lines()
= ["one", "two", "three"]
>> "":lines()
= []
```

---

## `lower`

**Description:**  
Converts all characters in the text to lowercase.

**Signature:**  
```tomo
func lower(text: Text -> Text)
```

**Parameters:**

- `text`: The text to be converted to lowercase.

**Returns:**  
The lowercase version of the text.

**Example:**  
```tomo
>> "AMÉLIE":lower()
= "amélie"
```

---

## `matches`

**Description:**  
Checks if the `Text` matches target pattern (see: [Patterns](#Patterns)) and
returns an array of the matching text captures or a null value if the entire
text doesn't match the pattern.

**Signature:**  
```tomo
func matches(text: Text, pattern: Pattern -> [Text])
```

**Parameters:**

- `text`: The text to be searched.
- `pattern`: The pattern to search for.

**Returns:**  
An array of the matching text captures if the entire text matches the pattern,
or a null value otherwise.

**Example:**  
```tomo
>> "hello world":matches($/{id}/)
= none : [Text]?

>> "hello world":matches($/{id} {id}/)
= ["hello", "world"] : [Text]?
```

---

## `map`

**Description:**  
For each occurrence of the given pattern, replace the text with the result of
calling the given function on that match.

**Signature:**  
```tomo
func map(text: Text, pattern: Pattern, fn: func(text:Match)->Text -> Text)
```

**Parameters:**

- `text`: The text to be searched.
- `pattern`: The pattern to search for.
- `fn`: The function to apply to each match.

**Returns:**  
The text with the matching parts replaced with the result of applying the given
function to each.

**Example:**  
```tomo
>> "hello world":map($/world/, func(m:Match): m.text:upper())
= "hello WORLD"
>> "Some nums: 1 2 3 4":map($/{int}/, func(m:Match): "$(Int.parse(m.text)! + 10)")
= "Some nums: 11 12 13 14"
```

---

## `quoted`

**Description:**  
Formats the text as a quoted string.

**Signature:**  
```tomo
func quoted(text: Text, color: Bool = no -> Text)
```

**Parameters:**

- `text`: The text to be quoted.
- `color`: Whether to add color formatting (default is `no`).

**Returns:**  
The text formatted as a quoted string.

**Example:**  
```tomo
>> "one$(\n)two":quoted()
= "\"one\\ntwo\""
```

---

## `repeat`

**Description:**  
Repeat some text multiple times.

**Signature:**  
```tomo
func repeat(text: Text, count:Int -> Text)
```

**Parameters:**

- `text`: The text to repeat.
- `count`: The number of times to repeat it. (Negative numbers are equivalent to zero).

**Returns:**  
The text repeated the given number of times.

**Example:**  
```tomo
>> "Abc":repeat(3)
= "AbcAbcAbc"
```

---

## `replace`

**Description:**  
Replaces occurrences of a pattern in the text with a replacement string.

See [Patterns](#patterns) for more information about patterns.

**Signature:**  
```tomo
func replace(text: Text, pattern: Pattern, replacement: Text, backref: Pattern = $/\/, recursive: Bool = yes -> Text)
```

**Parameters:**

- `text`: The text in which to perform replacements.
- `pattern`: The pattern to be replaced.
- `replacement`: The text to replace the pattern with.
- `backref`: If non-empty, the replacement text will have occurrences of this
  pattern followed by a number replaced with the corresponding backreference.
  By default, the backreference pattern is a single backslash, so
  backreferences look like `\0`, `\1`, etc.
- `recursive`: For backreferences of a nested capture, if recursive is set to
  `yes`, then the whole replacement will be reapplied recursively to the
  backreferenced text if it's used in the replacement.

**Backreferences**
If a backreference pattern is in the replacement, then that backreference is
replaced with the corresponding group from the matching text. Backreference
`0` is the entire matching text, backreference `1` is the first matched group,
and so on. Literal text is not captured for backreferences, only named group
captures (`{foo}`), quoted captures (`"?"`), and nested group captures (`(?)`).
For quoted and nested group captures, the backreference refers to the *inside*
of the capture without the enclosing punctuation.

If you need to insert a digit immediately after a backreference, you can use an
optional semicolon: `\1;2` (backref 1, followed by the replacement text`"2"`).

**Returns:**  
The text with occurrences of the pattern replaced.

**Example:**  
```tomo
>> "Hello world":replace($/world/, "there")
= "Hello there"

>> "Hello world":replace($/{id}/, "xxx")
= "xxx xxx"

>> "Hello world":replace($/{id}/, "\0")
= "(Hello) (world)"

>> "Hello world":replace($/{id}/, "(@0)", backref=$/@/)
= "(Hello) (world)"

>> "Hello world":replace($/{id} {id}/, "just \2")
= "just world"

# Recursive is the default behavior:
>> " BAD(x, BAD(y), z) ":replace($/BAD(?)/, "good(\1)", recursive=yes)
= " good(x, good(y), z) "

>> " BAD(x, BAD(y), z) ":replace($/BAD(?)/, "good(\1)", recursive=no)
= " good(x, BAD(y), z) "
```

---

## `replace_all`

**Description:**  
Takes a table mapping patterns to replacement texts and performs all the
replacements in the table on the whole text. At each position, the first
matching pattern's replacement is applied and the pattern matching moves on to
*after* the replacement text, so replacement text is not recursively modified.
See [`replace()`](#replace) for more information about replacement behavior.

**Signature:**  
```tomo
func replace_all(replacements:{Pattern:Text}, backref: Pattern = $/\/ -> Text)
```

**Parameters:**

- `text`: The text in which to perform replacements.
- `replacements`: A table mapping from patterns to the replacement text
  associated with that pattern.
- `backref`: If non-empty, the replacement text will have occurrences of this
  pattern followed by a number replaced with the corresponding backreference.
  By default, the backreference pattern is a single backslash, so
  backreferences look like `\0`, `\1`, etc.
- `recursive`: For backreferences of a nested capture, if recursive is set to
  `yes`, then the matching replacement will be reapplied recursively to the
  backreferenced text if it's used in the replacement.

**Returns:**  
The text with all occurrences of the patterns replaced with their corresponding
replacement text.

**Example:**  
```tomo
>> "A <tag> & an amperand":replace_all({
    $/&/: "&amp;",
    $/</: "&lt;",
    $/>/: "&gt;",
    $/"/: "&quot",
    $/'/: "&#39;",
}
= "A &lt;tag&gt; &amp; an ampersand"

>> "Hello":replace_all({$/{lower}/:"[\0]", $/{upper}/:"{\0}"})
= "{H}[ello]"
```

---

## `slice`

**Description:**  
Get a slice of the text.

**Signature:**  
```tomo
func slice(text: Text, from: Int = 1, to: Int = -1 -> Text)
```

**Parameters:**

- `text`: The text to be sliced.
- `from`: The index of the first grapheme cluster to include (1-indexed).
- `to`: The index of the last grapheme cluster to include (1-indexed).

**Returns:**  
The text that spans the given grapheme cluster indices. Note: a negative index
counts backwards from the end of the text, so `-1` refers to the last cluster,
`-2` the second-to-last, etc. Slice ranges will be truncated to the length of
the string.

**Example:**  
```tomo
>> "hello":slice(2, 3)
= "el"

>> "hello":slice(to=-2)
= "hell"

>> "hello":slice(from=2)
= "ello"
```

---

## `split`

**Description:**  
Splits the text into an array of substrings based on a pattern.
See [Patterns](#patterns) for more information about patterns.

**Signature:**  
```tomo
func split(text: Text, pattern: Pattern = "" -> [Text])
```

**Parameters:**

- `text`: The text to be split.
- `pattern`: The pattern used to split the text. If the pattern is the empty
  string, the text will be split into individual grapheme clusters.

**Returns:**  
An array of substrings resulting from the split.

**Example:**  
```tomo
>> "one,two,three":split($/,/)
= ["one", "two", "three"]

>> "abc":split()
= ["a", "b", "c"]

>> "a    b  c":split($/{space}/)
= ["a", "b", "c"]

>> "a,b,c,":split($/,/)
= ["a", "b", "c", ""]
```

---

## `starts_with`

**Description:**  
Checks if the `Text` starts with a literal prefix text.

**Signature:**  
```tomo
func starts_with(text: Text, prefix: Text -> Bool)
```

**Parameters:**

- `text`: The text to be searched.
- `prefix`: The literal prefix text to check for.

**Returns:**  
`yes` if the text has the given prefix, `no` otherwise.

**Example:**  
```tomo
>> "hello world":starts_with("hello")
= yes
```

---

## `title`

**Description:**  
Converts the text to title case (capitalizing the first letter of each word).

**Signature:**  
```tomo
func title(text: Text -> Text)
```

**Parameters:**

- `text`: The text to be converted to title case.

**Returns:**  
The text in title case.

**Example:**  
```tomo
>> "amélie":title()
= "Amélie"
```

---

## `to`

**Description:**  
Get a slice of the text, ending at the given position.

**Signature:**  
```tomo
func to(text: Text, last: Int -> Text)
```

**Parameters:**

- `text`: The text to be sliced.
- `last`: The index of the last grapheme cluster to include (1-indexed).

**Returns:**  
The text up to and including the given grapheme cluster. Note: a negative index
counts backwards from the end of the text, so `-1` refers to the last cluster,
`-2` the second-to-last, etc. Slice ranges will be truncated to the length of
the string.

**Example:**  
```tomo
>> "goodbye":to(3)
= "goo"

>> "goodbye":to(-2)
= "goodby"
```

---

## `trim`

**Description:**  
Trims the matching pattern from the left and/or right side of the text
See [Patterns](#patterns) for more information about patterns.

**Signature:**  
```tomo
func trim(text: Text, pattern: Pattern = $/{whitespace/, trim_left: Bool = yes, trim_right: Bool = yes -> Text)
```

**Parameters:**

- `text`: The text to be trimmed.
- `pattern`: The pattern that will be trimmed away.
- `trim_left`: Whether or not to trim from the front of the text.
- `trim_right`: Whether or not to trim from the back of the text.

**Returns:**  
The text without the trim pattern at either end.

**Example:**  
```tomo
>> "   x y z    $(\n)":trim()
= "x y z"

>> "abc123def":trim($/{!digit}/)
= "123"

>> "   xyz   ":trim(trim_right=no)
= "xyz   "
```

---

## `upper`

**Description:**  
Converts all characters in the text to uppercase.

**Signature:**  
```tomo
func upper(text: Text -> Text)
```

**Parameters:**

- `text`: The text to be converted to uppercase.

**Returns:**  
The uppercase version of the text.

**Example:**  
```tomo
>> "amélie":upper()
= "AMÉLIE"
```