1 files changed, 0 insertions, 318 deletions
diff --git a/scripts/bbbindkeys b/scripts/bbbindkeys
deleted file mode 100755
index bf5960a..0000000
--- a/scripts/bbbindkeys
+++ /dev/null
@@ -1,318 +0,0 @@
-#!/bin/sh
-# This file defines the key bindings for bb. It works by a very hacky script on
-# the line below that prints out the rest of this file, converted into `bbcmd
-# bind:` commands. Thanks to the hackiness, the code below is also valid shell
-# code, so syntax highlighting should work normally.
-#
-# The format is: ## <key>(,<key>)*:[ ]+<description>(\n script)+
-#
-# May God have mercy on my soul for creating this abomination:
-sed '1,'$LINENO'd; /^$/d; s/^## \(.*\): \(.*\)/\x00bind:\1:# \2/; $a\\x00' "$0" | bbcmd; exit
-
-## Section: BB Commands
-## ?,F1: Show Help menu
-bbcmd help
-
-## q,Q: Quit
-bbcmd quit
-
-## Ctrl-c: Send interrupt signal
-kill -INT $PPID
-
-## Ctrl-z: Suspend
-kill -TSTP $PPID
-
-## Ctrl-\: Quit and generate core dump
-kill -QUIT $PPID
-
-## Section: File Navigation
-## j,Down: Next file
-bbcmd move:+1
-
-## k,Up: Previous file
-bbcmd move:-1
-
-## h,Left: Parent directory
-bbcmd cd:..
-
-## l,Right: Enter directory
-if [ -d "$BB" ]; then bbcmd cd:"$BB"; fi
-
-## Ctrl-f: Search for file
-file="$(find . -mindepth 1 -printf '%P\0' | bbpick "Find: ")"
-bbcmd goto:"$file"
-
-## /: Pick a file
-file="$(printf "%s\0" $BBGLOB | bbpick "Pick: ")"
-bbcmd goto:"$file"
-
-## *: Set the glob
-glob="$(bbask "Show files matching: ")"
-bbcmd glob:"$glob"
-
-## Ctrl-g: Go to directory
-dir="$(bbask "Go to directory: ")"
-bbcmd cd:"$dir"
-
-## m: Mark this directory
-mkdir -p "$XDG_CONFIG_HOME/bb/marks"
-ln -sT "$2" "$XDG_CONFIG_HOME/bb/marks/$1" 2>/dev/null
-mark="$(bbask "Mark: ")"
-ln -s "$PWD" "$XDG_CONFIG_HOME"/bb/marks/"$mark"
-
-## ': Go to a marked directory
-[ -d "$XDG_CONFIG_HOME"/bb/marks ]
-mark="$(find "$XDG_CONFIG_HOME"/bb/marks/ -mindepth 1 -type l -printf '%P\0' | bbpick "Jump to: ")"
-mark="$(readlink -f "$XDG_CONFIG_HOME"/bb/marks/"$mark")"
-bbcmd cd:"$mark"
-
-## -,Backspace: Go to previous directory
-[ "$BBPREVPATH" ] && bbcmd cd:"$BBPREVPATH"
-
-## ;: Show selected files
-bbcmd cd:'<selection>'
-
-## 0: Go to intitial directory
-bbcmd cd:"$BBINITIALPATH"
-
-## g,Home: Go to first file
-bbcmd move:0
-
-## G,End: Go to last file
-bbcmd move:100%n
-
-## PgDn: Page down
-bbcmd scroll:+100%
-
-## PgUp: Page up
-bbcmd scroll:-100%
-
-## Ctrl-d: Half page down
-bbcmd scroll:+50%
-
-## Ctrl-u: Half page up
-bbcmd scroll:-50%
-
-## Mouse wheel down: Scroll down
-bbcmd scroll:+3
-
-## Mouse wheel up: Scroll up
-bbcmd scroll:-3
-
-
-## Section: File Selection
-## v,V,Space: Toggle selection at cursor
-bbcmd toggle:"$BB"
-
-## Escape: Clear selection
-bbcmd deselect
-
-## S: Select pattern
-patt="$(bbask "Select: ")"
-bbcmd select: $patt
-
-## U: Unselect pattern
-patt="$(bbask "Unselect: ")"
-bbcmd deselect: $patt
-
-## Comma: Save the current settings
-bbconfirm "Save the current settings? "
-echo "bbcmd glob:'$BBGLOB' sort:'$BBSORT' columns:'$BBCOLUMNS' $BBINTERLEAVE" > "$XDG_DATA_HOME"/bb/settings.sh
-
-## Ctrl-s: Save the selection
-[ $# -gt 0 ]
-savename="$(bbask "Save selection as: ")"
-savename="${savename%.sel}.sel"
-mkdir -p "$XDG_DATA_HOME"/bb
-printf '%s\0' "$@" > "$XDG_DATA_HOME/bb/$savename"
-
-## Ctrl-o: Open a saved selection
-[ -d "$XDG_DATA_HOME"/bb ]
-[ $# -gt 0 ] && bbconfirm "The current selection will be discarded. "
-loadpath="$(find "$XDG_DATA_HOME"/bb/ -mindepth 1 -name '*.sel' -printf '%P\0' | bbpick "Load selection: ")"
-bbcmd deselect select: <"$XDG_DATA_HOME/bb/$loadpath"
-
-## J: Spread selection down
-bbcmd spread:+1
-
-## K: Spread selection up
-bbcmd spread:-1
-
-## Shift-Home: Spread the selection to the top
-bbcmd spread:0
-
-## Shift-End: Spread the selection to the bottom
-bbcmd spread:100%n
-
-## Ctrl-a: Select all files here
-bbcmd select
-
-
-## Section: File Actions
-## Left click: Move cursor to file
-if [ "$BBCLICKED" = "<column label>" ]; then
-    bbcmd sort:"~$BBMOUSECOL"
-elif [ "$BBCLICKED" -a "$BBMOUSECOL" = "*" ]; then
-    bbcmd toggle:"$BBCLICKED"
-elif [ "$BBCLICKED" ]; then
-    bbcmd goto:"$BBCLICKED"
-fi
-
-## Enter,Double left click: Open file/directory
-if [ -d "$BB" ]; then bbcmd cd:"$BB"
-elif [ "$(uname)" = "Darwin" ]; then
-    if expr "$(file -bI "$BB")" : '\(text/\|inode/empty\)' >/dev/null; then $EDITOR "$BB"
-    else open "$BB"; fi
-else
-    if expr "$(file -bi "$BB")" : '\(text/\|inode/x-empty\)' >/dev/null; then $EDITOR "$BB"
-    else xdg-open "$BB"; fi
-fi
-
-## e: Edit file in $EDITOR
-$EDITOR "$BB"
-
-## d,Delete: Delete
-case "$(bbtargets "$BB" "$@")" in
-    cursor) set -- "$BB" ;;
-    both) set -- "$BB" "$@" ;;
-esac
-printf "\033[1mDeleting the following:\n\033[33m$(printf '  %s\n' "$@")\033[0m" | bbunscroll | more
-bbconfirm
-rm -rf "$@"
-bbcmd deselect refresh
-
-## Ctrl-v: Move files here
-printf "\033[1mMoving the following to here:\n\033[33m$(printf '  %s\n' "$@")\033[0m" | bbunscroll | more
-bbconfirm
-printf "\033[1G\033[KMoving..."
-mv -i "$@" .
-printf "done."
-bbcmd deselect refresh
-bbcmd sel: "${@##*/}"
-
-## c: Copy a file
-[ $# -gt 0 ]
-printf "\033[1mCopying the following to here:\n\033[33m$(printf '  %s\n' "$@")\033[0m" | bbunscroll | more
-bbconfirm
-printf "\033[1G\033[KCopying..."
-for f; do
-    if [ "./${f##*/}" -ef "$f" ]; then
-        cp -ri "$f" "$f.copy" || break
-    else cp -ri "$f" . || break; fi
-done
-printf 'done.'
-bbcmd refresh
-
-## Ctrl-n: New file/directory
-case "$(printf '%s\0' File Directory | bbpick "Create new: ")" in
-    File)
-        name="$(bbask "New File: ")" && printf '' >"$name"
-        ;;
-    Directory)
-        name="$(bbask "New Directory: ")" && mkdir -- "$name"
-        ;;
-    *) exit
-        ;;
-esac
-bbcmd goto:"$name" refresh
-
-## p: Page through a file with `less`
-less -XK "$BB"
-
-## r,F2: Rename files
-case "$(bbtargets "$BB" "$@")" in
-    cursor) set -- "$BB";;
-    both) set -- "$BB" "$@";;
-esac
-for f; do
-    newname="$(bbask "Rename $(printf "\033[33m%s\033[39m" "${f##*/}"): " "${f##*/}")" || break
-    r="$(dirname "$f")/$newname"
-    [ "$r" = "$f" ] && continue
-    [ -e "$r" ] && printf "\033[31;1m$r already exists! It will be overwritten.\033[0m "
-        && bbconfirm && { rm -rf "$r" || { bbpause; exit; }; }
-    mv "$f" "$r" || { bbpause; exit; }
-    bbcmd deselect:"$f" select:"$r"
-    [ "$f" = "$BB" ] && bbcmd goto:"$r"
-done
-bbcmd refresh
-
-## ~: Regex rename files
-if ! command -v rename >/dev/null; then
-    printf '\033[31;1mThe `rename` command is not installed. Please install it to use this key binding.\033[0m\n'
-    bbpause; exit 1
-fi
-if [ $# -eq 0 ]; then set -- $BBGLOB; fi
-patt="$(bbask "Replace pattern: ")"
-rep="$(bbask "Replacement: ")"
-printf "\033[1mRenaming:\n\033[33m$(rename -nv "$patt" "$rep" "$@")\033[0m" | bbunscroll | more
-bbconfirm
-rename -i "$patt" "$rep" "$@"
-bbcmd deselect refresh
-
-
-## Section: Shell Commands
-## Colon: Run a command
-cmd="$(bbask ':')"
-sh -c "$cmd" -- "$@" || true
-bbpause
-bbcmd refresh
-
-## |: Pipe selected files to a command
-cmd="$(bbask '|')"
-if [ $# -eq 0 ]; then set -- "$BB"; fi
-printf '%s\n' "$@" | sh -c "$cmd" || true
-bbpause
-bbcmd refresh
-
-## @: Pass selected files as args to a command
-cmd="$(bbask '@')"
-if [ $# -eq 0 ]; then set -- "$BB"; fi
-sh -c "$cmd \"\$@\"" -- "$@" || true
-bbpause
-bbcmd refresh
-
-## $: Pass the cursor as an argument to a command
-cmd="$(bbask '$')"
-sh -c "$cmd \"\$1\"" -- "$BB" || true
-bbpause
-bbcmd refresh
-
-## >: Open a shell
-tput rmcup; tput cvvis
-$SHELL || true
-bbcmd refresh
-
-## f: Resume suspended process
-bbcmd fg
-
-
-## Section: Viewing Options
-## s: Sort by...
-sort="$(bbask -1 "Sort (n)ame (s)ize (m)odification (c)reation (a)ccess (r)andom (p)ermissions: ")"
-bbcmd sort:"~$sort"
-
-## ---,#: Set columns
-columns="$(bbask "Set columns (*)selected (a)ccessed (c)reated (m)odified (n)ame (p)ermissions (r)andom (s)ize: ")"
-bbcmd col:"$columns"
-
-## .: Toggle dotfile visibility
-if [ "$BBGLOB" = ".* *" ]; then
-    bbcmd glob:"*"
-else
-    bbcmd glob:".* *"
-fi
-
-## i: Toggle interleaving files and directories
-bbcmd interleave
-
-## F5,Ctrl-l: Refresh view
-bbcmd refresh
-
-## Ctrl-b: Bind a key to a script
-key="$(bbask -1 "Press key to bind...")"
-echo
-script="$(bbask "Bind script: ")"
-bbcmd bind:"$key":"{ $script; } || bbpause"
-
-
-## Section: User Bindings